|
|
|
| |
Microprocessor & Microcontroller Trainers ("LCD" Type) |
| |
| |
|
|
SC 07 - 8279 Keyboard & Display Controllor Card With FRC Cable |
| |
| |
Feature: |
|
| |
- Programmable Keyboard Display Controller using 8279 IC.
- All scan lines/return lines are fed through input terminals and 26 pin
FRC connector.
- Data lines from AD0 to AD7 are indicated by 3 mm LED.
- Chip Select, Read, Write, INTA, A0 are indicated by 3 mm LED.
- Hardware Single Step and Full Clock Execution mode are provided.
- Single stepping can be performed using micro switch provided in the
board. 8 Digit Seven Segment display with 20 keys keypad interface
module can be interfaced with 8279 Study Card. (OPTIONAL)
- Using this study card all modes experiment can be performed.
- Interface 8085/8086 Kit using 50 pin FRC Connector.
- l User's Manual with Sample Program.
|
|
|
|
| |
SC 08 - 8212 Memory Decoder Study Card With FRC Cable |
| |
| |
Feature: |
|
| |
- Eight bit Latch output using 8212 IC Eight buffered latched output are
indicated by 3 mm LED.
- Hardware Single Step and Full Clock Execution modes are provided.
- Single stepping can be performed using micro switch provided on
board. Using this study card all MODE experiment can be
performed.
- Interface 8085/8086 Kit using 50 pin FRC Connector.
- User's Manual with Sample Programs.
|
|
|
|
| |
SC 09 - 373 Latch Study Card With FRC Cable |
| |
| |
Feature: |
|
| |
- 8 bit Latch output using 74373 IC.
- 8 bit Buffer input using 74245 IC.
- 8 buffered latch output are indicated by 3 mm LED.
- Eight Way DIP Switch is provided for buffer input.
- Eight bit buffered output are indicated by 3 mm LED.
- Chip Select for IC-74245 and IC-74373 are indicated by 3 mm LED.
Hardware Single Step and Full Clock Execution modes are provided.
Single stepping can be performed using micro switch provided on
board. Using this study card all MODE experiment can be performed.
- Interface 8085/8086 Kit using 50 pin FRC Connector.
- User's Manual with Sample Programs.
|
|
|
|
| |
SC 10 - 6264/6116 Ram Study Card With FRC Cable |
| |
| |
Feature: |
|
| |
- Random Access Memory using 6264 IC.
- Data lines from AD0 to AD7 are indicated by 3 mm LED.
- Chip Select, Read, Write are indicated by 3 mm LED.
- Hardware Single Step and Full Clock Execution modes are provided.
- Single stepping can be performed using micro switch provided on
board.
- Using this study card all MODE experiment can be performed.
- Interface 8085/8086 Kit using 50 pin FRC Connector.
User's Manual with Sample Programs.
|
|
|
|
| |
|
|
| |
|
|
