|
|
|
| |
Interfacing & Study Cards ("LED" Type) |
| |
| |
|
|
ME 1320 - ADC-0809 Interface Card
Uses 8 bit ADC-0809 monolithic C-MOS device with in- built 8 channel Multiplexer. 8
LED’s are provided to display the digital value of the input analog signal (Optional).
The complete operation of A/D converter chip can be understood using this card.
ME 1321 - Dual DAC Interface Card
Consists of two independent 8 bit Digital to Analog Converter along with a s t a b l e
regulated voltage source using 723 regulator. The current output of the D A C a r e
converted to voltage using operational amplifiers.
ME 1322 - Logic Controller Interface Card
The logic controller interface provides the user with 8 TTL buffered outputs and inputs.
The logic state of each input and outputs is indicated by LED. This module can be
effectively used to teach 8255 input & output modes. It can also simulate Ladder
networks.
ME 1323 - Elevator Simulator Interface Card
This interface simulates the control operation of an elevator. The elevator is considered
to function within a building having 4 floors. A key and corresponding LED indicator
serves as a request button and request status indicator. The LED's also indicate the
position of the elevator within the shaft.
ME 1324 - IC Tester Interface Card
The interface explain the working of IC tester for 14pin or 16pin digital IC's with the help
of microprocessor. Three personality modules are to be inserted in three different
sockets for the IC under test. A socket is provided for inserting the IC to be tested.
ME 1325 - Display Interface Card
A four digit display using shift registers can be obtained on this module. This module
has the capability to display in any combination. The display can be from right to left or
left to right. A delay can be put between two display.
ME 1326 - Stepper Motor Controller Interface Card
Can control Stepper motor in three parameters such as direction, speed and number of
steps. It has got driver transistor for driving all the phases of the motor useful for Robotic
and incremental control applications.
ME 1328 - Stepper Motor 0.25 kg-cm Torque
ME 1329 - Power Supply for Stepper Motor -0.25 kg-cm Torque
ME 1330 - Keyboard Interface Card
A calculator style KB consisting of the Keys 0 to 9, *, +, -, /, C CE and two user definable
keys, allowing the user of study a number of techniques used in Key Board interfacing
like software debouncing, two key lockout and keyboard encoding and pausing.
ME 1331 - LCD Display Interface Card
A 16X1 Liquid Crystal Display using shift registers can be obtained on this module. This
module has the capability to display in any combination. The display can be from right
to left or left to right. A delay can be put between two display.
ME 1332 - Traffic Light Controller Card
The Traffic Light Controller Card has RED., YELLOW & GREEN LED's to demonstrate
the use of Microprocessor in controlling the traffic movement under the control of
program. It is a good example of use of Microprocessor in common applications.
ME 1333 - Temperature Measurement Card with Thermocouple
Sensor to measure temperature upto 100oC along with room temperature
compensation and amplifier with output of 0-5V corresponding to the temperature.
|
| |
|
| |
|
| |
|
|
| |
|
|
